Description
Professional Flash Hole Uniformer
Hand Loader! Are you looking for improved accuracy? Accuracy demands consistency and precision in every operation and component used in hand loading. The brass case is very important and sometimes important details are overlooked–such as the Primer Pocket and Flash Hole inside of the case.
In cartridge manufacturing, the flash hole is “punched” into the brass. While this is the least expensive method, it has many shortcomings and inconsistencies. The flash holes, therefore, are of different sizes and shapes. The most detrimental to accuracy are the irregular “breakouts” and “burrs” on the inside. This will cause “shot-to-shot” differences in Primer “Flame Fronts”, causing inconsistent pressure/velocity and, thereby, loss of accuracy. Bench Rest Shooters have been uniforming flash holes since 1969.
With the Precision K & M UNIFORMER tools, you can realize the potential accuracy by simultaneously reaming, de-burring and chamfering the inside of the flash hole. The unique features of the K & M Tools provide uniformity with a pre-set depth stop, (Gage), surrounding the tool steel cutter, therefore, does not require the case to be trimmed to a precise or consistent length. Operation is controlled in reference to inside-bottom of case, not case mouth.
Tool Notes:
NEVER use these tools in a case with a live Primer De-Cap Case – insert the K & M uniformer through the mouth of the case into the flash hole- grip case, with the base in the palm of hand, while holding the centering cone with thumb and forefinger apply light pressure to lock the cone into the case mouth. Gently turn the tool. You can feel the work being done. The cutting will cease when the Pre-set Depth Gage comes in contact with the inside bottom of case. Each one will feel different as you cut away the burrs and provide the 60° chamfer.
Bruce Campbell –
Very easy to use and a clean hole. Surprising how much material comes from some cases.
Dave @ K&M –
Thanks Bruce! It is surprising how much of brass can come out. Drilled flash holes are better, but still roll a burr that should be removed.
rclovelace (verified owner) –
Excellent product and great service from K & M
Dave @ K&M –
Thanks rclovelace! Glad we hit our target: great products and service!
Kim Giles –
Absolutely love this tool. When I started cleaning up the flash holes I was amazed at how much material came out of some of the cases. I was so impressed I went ahead and ordered a case neck turner. Love the quality of y’all product.
Dave @ K&M –
Hey Kim, thanks for the kind words – we appreciate the feedback!
dbojar (verified owner) –
The best flash hole deburrer / unformer you can get. After having other brands that I was dis-satisfied with, I read a few reloading websites that posted reviews of this uniformer which basically said:
“this is the best out there” – “excellent quality” – “you will be completely satisfied” After using it – those reviews are correct. I’ll be ordering other products from K & M in the future.
Dave @ K&M –
Thanks for the review and sharing the good news!
David Swann (verified owner) –
This is a great tool for cleaning up flash holes and putting a slight chamfer around the flash hole. I just finished using the tool by hand with 100 Norma cases and it worked great. I have the older K&M Services tool with the hexagon handle and this newer version with the round blue anodized handle is so much easier to use and comfortable on the fingers. Thanks for a great upgrade to a fine tool, it’s the only one I’ll use.
Dave @ K&M –
David, thanks for the review and continued use of K&M tools! I’m glad the newer handle is working well for you.
Jeff Hailpern (verified owner) –
I ordered both the 0.80 and the 0.62 versions. These are great tools. Best cutter/ flutes on the market. After 200 cases my thumb had blisters. I really like this and wish a smooth handle was available. The knurls can be a bit rough. 5 Stars !
Dave @ K&M –
Thanks for the feedback Jeff. The knurl really helps if there are larger burrs to remove. Another option is to get our powered adapter kit – it is meant for the Premium Carbide tools, but will fit on the Professional units. You just have to take care to clear the chips out of the blocked flutes to not pack in the chips.
Brian Carpenter (verified owner) –
Quality product and great customer service. Who could ask for more.